# Design This file fixes the geometry. How the model's code is organised is up to you, as long as the numbers here hold. ## Card ID-1: 85.60 × 53.98 × 0.76 mm (ISO/IEC 7810). The slot thickness is 0.76 + `clearance`. Cascade offset (how much each card peeks) is 8 mm, unless the file says otherwise, in `fixtures/wallet-measures.json`. ## Cash sleeve If on, a pocket of at least 2 mm opening, behind the slots, as in the file. ## Inputs | Key | Label | Default | Notes | | --- | --- | --- | --- | | `slots` | Number of slots | 4 | From 2 to 8. | | `clearance` | Card clearance, mm | 0.2 | Added to the card thickness, from 0.1 to 0.4. | | `wall` | Wall thickness, mm | 1.6 | From 1.2 to 3. | | `cash` | A cash sleeve | on | A flat pocket behind the slots. | | `clip` | A money clip form | off | A simple clip feature, not a bought spring. | | `tool` | Modelling tool | cadquery | CadQuery writes STEP and STL. OpenSCAD writes STL. | ## Acceptance at the defaults Millimetres. Default width 74, height 100, two card slots, cash sleeve on, clip off. Sized around a 85.6 × 53.98 mm card with documented clearance, not a branded wallet. | Quantity | Value | Tolerance | Source | | --- | --- | --- | --- | | Outer width, height | 74.00, 100.00 | 0.15 | Closed, empty | | Body thickness | 8.00 | 0.15 | Empty, cash sleeve on | | Card slot opening | 55.20 × 2.00 | 0.10 | Two slots | | Card insertion clearance | 0.60 | 0.10 | Around a 85.60 × 53.98 card | | Cash sleeve inner height | 90.00 | 0.20 | When `cash` is on | A card inserted in a slot in the model does not intersect the wall and protrudes 8 to 16 mm for a grip. Print as one piece, open slots facing up. Minimum wall 1.6 mm. ## Screenshots These pictures are headless OpenSCAD renders of the reference model in `reference/model.scad`, at the default inputs. They are not drawings of a product that has not been modelled. The first picture is the one Spekkr shows on the spec's card. A build may ship its own goldens; those goldens are of that build and do not have to match these frames pixel-for-pixel. | File | What it shows | | --- | --- | | `shots/open-slots.png` | Wallet 74 × 100 mm, two card slots | ## How to verify 1. Build the model at the default inputs and at two other legal input sets. 2. Measure every row of the acceptance table in this file; each must fall inside its tolerance. Use the solid itself or a mesh library on the exported STL, as `design.md` says for the chosen tool. 3. Refuse at least one out-of-range input by name before modelling. 4. Confirm each exported part is a manifold, watertight mesh, and that walls and print orientation hold where this file asks. 5. Slot count and openings are measured against ISO/IEC 7810 card size plus the stated clearance. Wall thickness is checked. Renders include card solids instanced in the slots. No physical print and no real cards are required. No card-network marks are used.