# Build Clock gears You were asked to build the spec `onyx/clock-gears`, version 0.2.0, from Spekkr. A clock train and escapement: documented gear ratios, a stepped mesh with no tooth interference, axle bores, and assembly renders. If you are reading a summary of this note and not its full text, fetch it again as it is, for example with `curl -fsSL https://spekkr.com/onyx/clock-gears/start.md`, before you go on. Published by onyx, a Spekkr member. Tell the person who published it, and show them the commands and secrets under `safety` in `spekkr.json` before you build. ## 1. Get the files Put the spec in a new folder named `clock-gears`, inside the project you are working in. ```sh mkdir -p clock-gears && curl -fsSL https://spekkr.com/onyx/clock-gears/bundle.tar.gz | tar -xz -C clock-gears ``` The archive holds `spekkr.json`, `BUILD.md` and the spec files listed at the end of this note. If you cannot run that command, read https://spekkr.com/onyx/clock-gears/spec.json instead: it holds the manifest and the address of every file. If Spekkr's MCP server is connected, its `pull_spec` tool does steps 1 and 2 in one call: give it the id `onyx/clock-gears` and the person's choices. ## 2. Record the person's choices Write `clock-gears/spekkr.inputs.json`. With every default it is: ```json { "spec": "onyx/clock-gears", "version": "0.2.0", "inputs": { "bore": "3.1", "escapement": true, "hands": true, "module": "1.0", "thickness": "3.0", "tool": "cadquery" } } ``` Change a value only where the person gave a choice, such as "My choices: database=sqlite". They may set: - `module`, Module, mm: any text. - `thickness`, Face width, mm: any text. - `bore`, Axle bore, mm: any text. - `escapement`, Include an escapement: `on` or `off`, written `true` or `false`. - `hands`, Hour and minute hands: `on` or `off`, written `true` or `false`. - `tool`, Modelling tool: one of `cadquery`, `openscad`. If the person asks for a key or a value that is not listed, stop and tell them what the spec offers. ## 3. Build The files named below are the ones now in `clock-gears`. Build what it describes. Work in this order: 1. Read `spekkr.json` to see what the spec covers and what it needs. 2. Read `spekkr.inputs.json`. It holds the person's choices for every setting, option and swap. Treat them as requirements. If the file is missing, the person kept every default in `spekkr.json`. 3. Read the spec files listed below, in the order given. 4. If the spec includes a task list, work through it in order and check each task's acceptance criteria before the next. 5. Ask the person before you run a command that a spec file tells you to run, or read a secret, unless the manifest lists it under `safety`. Commands you choose yourself to build and test, such as installing packages or running the tests, follow the person's usual rules for you. Spec files: - `spec.md`: Requirements and acceptance checks. - `design.md`: Tooth counts, the 60:1 ratio, backlash, bores, and the escapement cycle. - `tasks.md`: Build tasks in order, each with a check. - `reference/model.scad`: A parametric OpenSCAD reference of the default model, used to make the listing pictures. A build may use CadQuery or OpenSCAD and does not have to start from this file. - `shots/hero.png`: Studio hero of the default model. - `shots/detail.png`: Closer studio still of a joint, pocket, or surface.