# Tasks Work in order. Finish a task's check before starting the next. 1. **Set up.** Install the tool in the `tool` input (CadQuery or OpenSCAD) and a mesh library for the checks. Read `spekkr.inputs.json` into one place at the top of the model. Check: an empty or trivial model is written and read back, and the inputs are visible in that source. 2. **Pitch and thickness (R1).** Build what `R1. Pitch and thickness` asks for, to the numbers in `design.md`. In particular: Cell centres are `pitch` apart on a hex grid, with the neighbour deltas in `design.md`. The wall's bounding box matches the formula file within 0.05 mm. Check: the `R1. Pitch and thickness` acceptance checks pass. 3. **Accessories and meshes (R2).** Build what `R2. Accessories and meshes` asks for, to the numbers in `design.md`. In particular: A hook and a bin, when included, seat in a cell with the insertion clearance in `design.md` (0.2 mm), and do not overlap the wall in the mated pose. Check: the `R2. Accessories and meshes` acceptance checks pass. 4. **Files (R3).** Build what `R3. Files` asks for, to the numbers in `design.md`. In particular: Export, a report, a twice-run hash, both tools. No physical print. Check: the `R3. Files` acceptance checks pass. 5. **Inputs (R4).** Build what `R4. Inputs` asks for, to the numbers in `design.md`. In particular: Numeric inputs are read from `spekkr.inputs.json` and must stay inside the ranges in the Inputs table in `design.md`. Check: the `R4. Inputs` acceptance checks pass. 6. **Goldens and the report.** Render the documented views of the default model. Run the one-command report at the defaults, at the person's inputs, and at one more legal set. Check: the report says pass throughout, and the rendered views are written next to the model. 7. **Finish.** Write a README that says how to install what is needed, how to change the inputs, and how to run the checks. Run the one command from a clean folder. Check: every item under Definition of done in `spec.md` is true.