{
  "manifest": {
    "spekkr": 1,
    "id": "onyx/module-knobs",
    "name": "Module knobs",
    "summary": "A family of knobs for modular-synth shafts: bore and D-flat dimensions against a stated standard, press-fit allowances, and rendered sizes.",
    "keywords": [
      "knobs",
      "shaft",
      "d-flat",
      "press fit",
      "modular"
    ],
    "kind": "CAD",
    "version": "0.2.0",
    "author": {
      "id": "onyx",
      "name": "Onyx"
    },
    "targets": {
      "stack": [
        "CadQuery",
        "OpenSCAD"
      ]
    },
    "customize": {
      "settings": [
        {
          "key": "diameter",
          "label": "Skirt diameter, mm",
          "default": "16",
          "help": "From 10 to 28."
        },
        {
          "key": "bore",
          "label": "Shaft bore, mm",
          "default": "6.0",
          "help": "The round shaft, before the D-flat, from 3.0 to 6.5."
        },
        {
          "key": "press",
          "label": "Press-fit allowance, mm",
          "default": "0.05",
          "help": "How much tighter the bore is than the stated shaft, from 0 to 0.12."
        },
        {
          "key": "height",
          "label": "Height, mm",
          "default": "12",
          "help": "From 8 to 20."
        }
      ],
      "options": [
        {
          "key": "dflat",
          "label": "A D-flat",
          "default": true,
          "help": "A flat on the bore, as in the stated standard."
        },
        {
          "key": "pointer",
          "label": "A pointer line",
          "default": true,
          "help": "A mark on the skirt."
        }
      ],
      "swaps": [
        {
          "key": "tool",
          "label": "Modelling tool",
          "choices": [
            "cadquery",
            "openscad"
          ],
          "default": "cadquery",
          "help": "CadQuery writes STEP and STL. OpenSCAD writes STL."
        },
        {
          "key": "standard",
          "label": "Shaft standard",
          "choices": [
            "6mm-d",
            "quarter-inch"
          ],
          "default": "6mm-d",
          "help": "The documented shaft table in design.md."
        }
      ]
    },
    "files": [
      {
        "path": "spec.md",
        "about": "Requirements and acceptance checks."
      },
      {
        "path": "design.md",
        "about": "Shaft tables, D-flat geometry, press-fit allowance, and a family of sizes."
      },
      {
        "path": "tasks.md",
        "about": "Build tasks in order, each with a check."
      },
      {
        "path": "reference/model.scad",
        "about": "A parametric OpenSCAD reference of the default model, used to make the listing pictures. A build may use CadQuery or OpenSCAD and does not have to start from this file."
      },
      {
        "path": "shots/hero.png",
        "about": "Studio hero of the default model."
      },
      {
        "path": "shots/detail.png",
        "about": "Closer studio still of a joint, pocket, or surface."
      }
    ],
    "needs": {
      "permissions": [
        "shell"
      ]
    },
    "demo": {
      "screenshots": [
        "shots/hero.png",
        "shots/detail.png"
      ]
    },
    "safety": {
      "commands": [
        "install CadQuery or OpenSCAD, whichever the tool input names",
        "install a mesh library, such as trimesh"
      ]
    },
    "lineage": {},
    "changelog": [
      {
        "version": "0.2.0",
        "date": "2026-11-15",
        "note": "Studio product shots from a shared Cycles rig (cyclorama, PLA materials), including a short loop when present."
      },
      {
        "version": "0.1.0",
        "date": "2026-11-14",
        "note": "First version."
      }
    ]
  },
  "links": {
    "page": "./",
    "bundle": "bundle.tar.gz",
    "files": {
      "design.md": "files/design.md",
      "reference/model.scad": "files/reference/model.scad",
      "shots/detail.png": "files/shots/detail.png",
      "shots/hero.png": "files/shots/hero.png",
      "spec.md": "files/spec.md",
      "tasks.md": "files/tasks.md"
    }
  },
  "publishedBy": "onyx",
  "uploaded": {
    "shots/detail.png": {
      "bytes": 4554307,
      "type": "image/png"
    },
    "shots/hero.png": {
      "bytes": 4546863,
      "type": "image/png"
    }
  }
}
