{
  "manifest": {
    "spekkr": 1,
    "id": "onyx/print-in-place-prop",
    "name": "Print-in-place prop",
    "summary": "A print-in-place propeller: axle clearance, a rotational sweep without intersection, approximate mass balance, and renders.",
    "keywords": [
      "propeller",
      "print in place",
      "axle",
      "balance",
      "sweep"
    ],
    "kind": "CAD",
    "version": "0.2.0",
    "author": {
      "id": "onyx",
      "name": "Onyx"
    },
    "targets": {
      "stack": [
        "CadQuery",
        "OpenSCAD"
      ]
    },
    "customize": {
      "settings": [
        {
          "key": "diameter",
          "label": "Diameter, mm",
          "default": "80",
          "help": "From 40 to 140, the blade tip circle."
        },
        {
          "key": "gap",
          "label": "Axle gap, mm",
          "default": "0.3",
          "help": "From 0.2 to 0.5, the print-in-place clearance."
        },
        {
          "key": "blades",
          "label": "Blade count",
          "default": "3",
          "help": "2, 3 or 4."
        }
      ],
      "options": [
        {
          "key": "hub_cap",
          "label": "A hub cap",
          "default": true,
          "help": "A print-in-place cap over the axle."
        },
        {
          "key": "stand",
          "label": "A small stand",
          "default": true,
          "help": "A stand the prop can spin on, in a desktop model."
        }
      ],
      "swaps": [
        {
          "key": "tool",
          "label": "Modelling tool",
          "choices": [
            "cadquery",
            "openscad"
          ],
          "default": "cadquery",
          "help": "CadQuery writes STEP and STL. OpenSCAD writes STL."
        }
      ]
    },
    "files": [
      {
        "path": "spec.md",
        "about": "Requirements and acceptance checks."
      },
      {
        "path": "design.md",
        "about": "Axle gap, the rotational sweep, and the mass-moment bound."
      },
      {
        "path": "tasks.md",
        "about": "Build tasks in order, each with a check."
      },
      {
        "path": "reference/model.scad",
        "about": "A parametric OpenSCAD reference of the default model, used to make the listing pictures. A build may use CadQuery or OpenSCAD and does not have to start from this file."
      },
      {
        "path": "shots/hero.png",
        "about": "Studio hero of the default model."
      },
      {
        "path": "shots/detail.png",
        "about": "Closer studio still of a joint, pocket, or surface."
      }
    ],
    "needs": {
      "permissions": [
        "shell"
      ]
    },
    "demo": {
      "screenshots": [
        "shots/hero.png",
        "shots/detail.png"
      ]
    },
    "safety": {
      "commands": [
        "install CadQuery or OpenSCAD, whichever the tool input names",
        "install a mesh library, such as trimesh"
      ]
    },
    "lineage": {},
    "changelog": [
      {
        "version": "0.2.0",
        "date": "2026-11-15",
        "note": "Studio product shots from a shared Cycles rig (cyclorama, PLA materials), including a short loop when present."
      },
      {
        "version": "0.1.0",
        "date": "2026-11-14",
        "note": "First version."
      }
    ]
  },
  "links": {
    "page": "./",
    "bundle": "bundle.tar.gz",
    "files": {
      "design.md": "files/design.md",
      "reference/model.scad": "files/reference/model.scad",
      "shots/detail.png": "files/shots/detail.png",
      "shots/hero.png": "files/shots/hero.png",
      "spec.md": "files/spec.md",
      "tasks.md": "files/tasks.md"
    }
  },
  "publishedBy": "onyx",
  "uploaded": {
    "shots/detail.png": {
      "bytes": 4460785,
      "type": "image/png"
    },
    "shots/hero.png": {
      "bytes": 4455942,
      "type": "image/png"
    }
  }
}
