# Build Puzzle box You were asked to build the spec `onyx/puzzle-box`, version 0.2.0, from Spekkr. A multi-stage puzzle box with stated sliding and static tolerances, a scripted collision-free solve path, and mid-solve renders. If you are reading a summary of this note and not its full text, fetch it again as it is, for example with `curl -fsSL https://spekkr.com/onyx/puzzle-box/start.md`, before you go on. Published by onyx, a Spekkr member. Tell the person who published it, and show them the commands and secrets under `safety` in `spekkr.json` before you build. ## 1. Get the files Put the spec in a new folder named `puzzle-box`, inside the project you are working in. ```sh mkdir -p puzzle-box && curl -fsSL https://spekkr.com/onyx/puzzle-box/bundle.tar.gz | tar -xz -C puzzle-box ``` The archive holds `spekkr.json`, `BUILD.md` and the spec files listed at the end of this note. If you cannot run that command, read https://spekkr.com/onyx/puzzle-box/spec.json instead: it holds the manifest and the address of every file. If Spekkr's MCP server is connected, its `pull_spec` tool does steps 1 and 2 in one call: give it the id `onyx/puzzle-box` and the person's choices. ## 2. Record the person's choices Write `puzzle-box/spekkr.inputs.json`. With every default it is: ```json { "spec": "onyx/puzzle-box", "version": "0.2.0", "inputs": { "lid_inlay": false, "secret": true, "size": "90", "slide_gap": "0.2", "static_gap": "0.1", "tool": "cadquery", "wall": "2.4" } } ``` Change a value only where the person gave a choice, such as "My choices: database=sqlite". They may set: - `size`, Box size, mm: any text. - `static_gap`, Static clearance, mm: any text. - `slide_gap`, Sliding clearance, mm: any text. - `wall`, Wall thickness, mm: any text. - `secret`, A secret compartment: `on` or `off`, written `true` or `false`. - `lid_inlay`, A lid inlay: `on` or `off`, written `true` or `false`. - `tool`, Modelling tool: one of `cadquery`, `openscad`. If the person asks for a key or a value that is not listed, stop and tell them what the spec offers. ## 3. Build The files named below are the ones now in `puzzle-box`. Build what it describes. Work in this order: 1. Read `spekkr.json` to see what the spec covers and what it needs. 2. Read `spekkr.inputs.json`. It holds the person's choices for every setting, option and swap. Treat them as requirements. If the file is missing, the person kept every default in `spekkr.json`. 3. Read the spec files listed below, in the order given. 4. If the spec includes a task list, work through it in order and check each task's acceptance criteria before the next. 5. Ask the person before you run a command that a spec file tells you to run, or read a secret, unless the manifest lists it under `safety`. Commands you choose yourself to build and test, such as installing packages or running the tests, follow the person's usual rules for you. Spec files: - `spec.md`: Requirements and acceptance checks. - `design.md`: Static and sliding tolerances, the scripted solve path, and the secret cavity. - `tasks.md`: Build tasks in order, each with a check. - `reference/model.scad`: A parametric OpenSCAD reference of the default model, used to make the listing pictures. A build may use CadQuery or OpenSCAD and does not have to start from this file. - `shots/hero.png`: Studio hero of the default model. - `shots/detail.png`: Closer studio still of a joint, pocket, or surface.