# Build Rugged box You were asked to build the spec `onyx/rugged-box`, version 0.2.0, from Spekkr. A parametric rugged box: lid fit, latch engagement, gasket groove, stack height, and exploded plus closed renders, with no print required. If you are reading a summary of this note and not its full text, fetch it again as it is, for example with `curl -fsSL https://spekkr.com/onyx/rugged-box/start.md`, before you go on. Published by onyx, a Spekkr member. Tell the person who published it, and show them the commands and secrets under `safety` in `spekkr.json` before you build. ## 1. Get the files Put the spec in a new folder named `rugged-box`, inside the project you are working in. ```sh mkdir -p rugged-box && curl -fsSL https://spekkr.com/onyx/rugged-box/bundle.tar.gz | tar -xz -C rugged-box ``` The archive holds `spekkr.json`, `BUILD.md` and the spec files listed at the end of this note. If you cannot run that command, read https://spekkr.com/onyx/rugged-box/spec.json instead: it holds the manifest and the address of every file. If Spekkr's MCP server is connected, its `pull_spec` tool does steps 1 and 2 in one call: give it the id `onyx/rugged-box` and the person's choices. ## 2. Record the person's choices Write `rugged-box/spekkr.inputs.json`. With every default it is: ```json { "spec": "onyx/rugged-box", "version": "0.2.0", "inputs": { "gasket": true, "inner_height": "50", "inner_length": "120", "inner_width": "80", "latches": true, "tool": "cadquery", "wall": "3.0" } } ``` Change a value only where the person gave a choice, such as "My choices: database=sqlite". They may set: - `inner_length`, Inside length, mm: any text. - `inner_width`, Inside width, mm: any text. - `inner_height`, Inside height, mm: any text. - `wall`, Wall thickness, mm: any text. - `gasket`, A gasket groove: `on` or `off`, written `true` or `false`. - `latches`, Latches: `on` or `off`, written `true` or `false`. - `tool`, Modelling tool: one of `cadquery`, `openscad`. If the person asks for a key or a value that is not listed, stop and tell them what the spec offers. ## 3. Build The files named below are the ones now in `rugged-box`. Build what it describes. Work in this order: 1. Read `spekkr.json` to see what the spec covers and what it needs. 2. Read `spekkr.inputs.json`. It holds the person's choices for every setting, option and swap. Treat them as requirements. If the file is missing, the person kept every default in `spekkr.json`. 3. Read the spec files listed below, in the order given. 4. If the spec includes a task list, work through it in order and check each task's acceptance criteria before the next. 5. Ask the person before you run a command that a spec file tells you to run, or read a secret, unless the manifest lists it under `safety`. Commands you choose yourself to build and test, such as installing packages or running the tests, follow the person's usual rules for you. Spec files: - `spec.md`: Requirements and acceptance checks. - `design.md`: Lid fit, latch engagement, gasket groove, and stack height. - `tasks.md`: Build tasks in order, each with a check. - `reference/model.scad`: A parametric OpenSCAD reference of the default model, used to make the listing pictures. A build may use CadQuery or OpenSCAD and does not have to start from this file. - `shots/hero.png`: Studio hero of the default model. - `shots/detail.png`: Closer studio still of a joint, pocket, or surface.