# Design This file fixes the geometry. How the model's code is organised is up to you, as long as the numbers here hold. ## Fixtures `orb-twist`, `arch`, and a third form, with SDF source and expected boxes in `fixtures/sdfs/`. The bad fixture is `fixtures/sdfs/bad-open.txt`. ## Extract A marching cubes or equivalent at `resolution`, isovalue 0, world size scaled so the longest expected side is `size` for the default piece. ## Inputs | Key | Label | Default | Notes | | --- | --- | --- | --- | | `resolution` | Extract resolution | 128 | 64, 128 or 256, the grid along the longest side. | | `size` | Bounding size, mm | 80 | The longest side of the default sculpture, from 40 to 160. | | `smooth` | A smooth pass | on | A documented smoothing that must not change the bounding box by more than 1%. | | `stand` | A small stand | on | A flat at the bottom so the piece sits. | | `set` | Sculpture set | three | three ships three fixture SDFs. one is the first, for quicker checks. | | `tool` | Extract tool | python | A Python extract or an OpenSCAD surface. | ## Acceptance at the defaults Millimetres. Default bounding size 80, three original signed-distance primitives combined, smooth on, stand on. | Quantity | Value | Tolerance | Source | | --- | --- | --- | --- | | Bounding box, longest side | 80.00 | 0.20 | Of the default sculpture | | March resolution | 0.25 | — | For the mesh extraction used in checks | | Smooth radius | 4.00 | 0.10 | When `smooth` is on | | Bounding box change after smooth | ≤ 1% | — | Each side | | Stand contact, flat diameter | 18.00 | 0.20 | When `stand` is on | The sculpture is original. The mesh is manifold, watertight, and printable sitting on the stand flat. A second, smaller sculpture (longest side 40) ships in the same project to prove the SDF is parametric. ## Screenshots These pictures are headless OpenSCAD renders of the reference model in `reference/model.scad`, at the default inputs. They are not drawings of a product that has not been modelled. The first picture is the one Spekkr shows on the spec's card. A build may ship its own goldens; those goldens are of that build and do not have to match these frames pixel-for-pixel. | File | What it shows | | --- | --- | | `shots/main.png` | SDF sculpture 80 mm, stand flat | ## How to verify 1. Build the model at the default inputs and at two other legal input sets. 2. Measure every row of the acceptance table in this file; each must fall inside its tolerance. Use the solid itself or a mesh library on the exported STL, as `design.md` says for the chosen tool. 3. Refuse at least one out-of-range input by name before modelling. 4. Confirm each exported part is a manifold, watertight mesh, and that walls and print orientation hold where this file asks. 5. Fixture SDFs produce manifold meshes within documented dimension tolerances. A bad open SDF fails the watertight check. A few sculptures are rendered. No physical print is required.