Breath guide
A breathing guide whose phases follow a fake clock or a fixture signal, with no microphone, and a golden inhale and exhale frame.
This is a small site spec on Spekkr, published by lume. It is listed with the other specs. Paste the line to an agent that can open a web address, and the agent fetches the files and builds from them.
- Spec
lume/breath-guide- Version
- 0.2.2
- Published by
- lume
- Updated
- 15 Nov 2026
Build this spec
Build the spec at https://spekkr.com/lume/breath-guide/start.md.
Paste this to your AI agent. It opens the address, fetches the spec's files, records your choices and builds from them. Nothing to install, no account.
Published by lume.
What does the result look like?
What can I customize?
Your choices go into the line you copy. Anything else is yours to edit, but it leaves the tested path.
What do I get?
-
spec.mdRequirements and acceptance checks.Breath guide
What this builds
A quiet guide for a breathing pattern. Phases are inhale, an optional hold, and exhale, driven by an injectable clock, or (in a later hook) a fixture breath signal. No microphone is required, and a hook fails if one is used in the checks. Golden frames are taken at inhale and exhale. This is a visual timer, not a medical device.
Read
spekkr.inputs.jsonfirst.titlelabels the guide.inhaleandexhaleare durations.holdadds a hold (2 seconds unless the settings say otherwise — use 2 as the default hold).shapeis the drawing. The clock is injectable.Out of scope
- A medical claim, a diagnosis, or a microphone-based coach in the checks.
- Network or an account.
- A live bio-sensor.
Requirements
Each requirement has an id. Checks name the id they cover.
R1. Phases
- With inhale 4, hold on (2 s), exhale 6, a cycle is 12 seconds. At injected t = 0–4 the phase is inhale, 4–6 hold, 6–12 exhale, then it repeats.
- The circle's (or bar's) scale is a documented function of the phase time, in
design.md, within 1%. - A fixture breath-signal file may drive the phase instead; when used, the phase follows the file, not the clock.
Accept when: the default cycle's phases and scale match at the listed instants, and the signal file drives the phase when provided.
R2. Frames and files
- Goldens at mid-inhale, mid-hold, mid-exhale, and the end of a cycle.
- A hook fails if a microphone API is used. One command runs the phase table, the signal file, the hook, and writes the frames. No network.
Accept when: the hook stays quiet, and the four frames match the goldens.
R3. Inputs
- The build reads
spekkr.inputs.json. Settings label the UI, options turn features on or off, and a swap must be one of its choices. - A value outside a stated range, or a swap that is not one of its choices, is refused before the app starts its checks, with a message that names the key.
Accept when: the default inputs render, an illegal swap is refused by name, and changing a visible setting (for example the title) shows up in a later check.
R4. Checks and report
- One command runs every acceptance check at the defaults and at the person's inputs, including golden frames where a requirement asks for them.
- Checks do not need a network, a paid API, or physical hardware.
Accept when: the command passes at the defaults, and a deliberately broken fixture or a wrong price fails it.
Verification
Phase timing is tested with a fake clock, and optionally with a fixture breath signal. No microphone is required or permitted in the checks. Golden inhale, hold, and exhale frames are taken. This is not a medical device. No network.
Definition of done
- Every acceptance check above runs from one command, and all pass at the person's inputs.
- A README says how to start a cycle, how to pin the clock, and how to run the checks.
# Breath guide ## What this builds A quiet guide for a breathing pattern. Phases are inhale, an optional hold, and exhale, driven by an injectable clock, or (in a later hook) a fixture breath signal. No microphone is required, and a hook fails if one is used in the checks. Golden frames are taken at inhale and exhale. This is a visual timer, not a medical device. Read `spekkr.inputs.json` first. `title` labels the guide. `inhale` and `exhale` are durations. `hold` adds a hold (2 seconds unless the settings say otherwise — use 2 as the default hold). `shape` is the drawing. The clock is injectable. ## Out of scope - A medical claim, a diagnosis, or a microphone-based coach in the checks. - Network or an account. - A live bio-sensor. ## Requirements Each requirement has an id. Checks name the id they cover. ### R1. Phases - With inhale 4, hold on (2 s), exhale 6, a cycle is 12 seconds. At injected t = 0–4 the phase is inhale, 4–6 hold, 6–12 exhale, then it repeats. - The circle's (or bar's) scale is a documented function of the phase time, in `design.md`, within 1%. - A fixture breath-signal file may drive the phase instead; when used, the phase follows the file, not the clock. Accept when: the default cycle's phases and scale match at the listed instants, and the signal file drives the phase when provided. ### R2. Frames and files - Goldens at mid-inhale, mid-hold, mid-exhale, and the end of a cycle. - A hook fails if a microphone API is used. One command runs the phase table, the signal file, the hook, and writes the frames. No network. Accept when: the hook stays quiet, and the four frames match the goldens. ### R3. Inputs - The build reads `spekkr.inputs.json`. Settings label the UI, options turn features on or off, and a swap must be one of its choices. - A value outside a stated range, or a swap that is not one of its choices, is refused before the app starts its checks, with a message that names the key. Accept when: the default inputs render, an illegal swap is refused by name, and changing a visible setting (for example the title) shows up in a later check. ### R4. Checks and report - One command runs every acceptance check at the defaults and at the person's inputs, including golden frames where a requirement asks for them. - Checks do not need a network, a paid API, or physical hardware. Accept when: the command passes at the defaults, and a deliberately broken fixture or a wrong price fails it. ## Verification Phase timing is tested with a fake clock, and optionally with a fixture breath signal. No microphone is required or permitted in the checks. Golden inhale, hold, and exhale frames are taken. This is not a medical device. No network. ## Definition of done - Every acceptance check above runs from one command, and all pass at the person's inputs. - A README says how to start a cycle, how to pin the clock, and how to run the checks.
-
design.mdPhase timings on a fake clock, the scale function, and the no-microphone rule.Design
This file fixes the parts that are easy to get wrong. The language and tools are up to you, as long as the numbers here hold.
Scale
For a circle, radius goes from 40% to 100% of a max during inhale, holds at 100%, and returns to 40% during exhale, with a linear ease. Exact values at mid-phase are in
fixtures/breath-scale.json.Hold duration is 2 seconds when the option is on, 0 when off. There is no hold-after-exhale in this version.
Screenshot tolerance
8 levels, 98% of pixels.
Inputs
Key Label Default Notes titleTitle In, then out Shown above the guide. inhaleInhale, seconds 4 From 2 to 8. exhaleExhale, seconds 6 From 2 to 10. holdA hold after inhale on A hold of hold_seconds(default 2) after each inhale.soundA soft cue off Tests may mock audio. shapeShape circle How the phase is drawn. Acceptance at the defaults
The numbers, names and fixture paths already in this file are the authority. Where a later table or a shipped fixture file disagrees with prose, the table or the fixture wins.
Fixture Role design.mdA shipped fixture. The build may move it, but then design.mdmust name the new path.fixtures/breath-scale.jsonA shipped fixture. The build may move it, but then design.mdmust name the new path.spekkr.inputs.jsonA shipped fixture. The build may move it, but then design.mdmust name the new path.Golden frames are compared at 1400 by 1000 CSS pixels unless a requirement names another size. Tolerance, unless a tighter figure is given above: 8 levels, 98% of pixels, with motion, cursors and clocks frozen as this file says. A build's goldens are of that build; they do not have to match a shipped reference preview pixel-for-pixel if the tool or the type is different, but they do have to match this file's layout, counts and copy.
Screenshots
These pictures are headless-Chrome captures of the working reference in
reference/preview.html, at the default inputs. They are not drawings of a product that has not been built. The first picture is the one Spekkr shows on the spec's card. A build may ship its own goldens; those goldens are of that build and do not have to match these frames pixel-for-pixel.File What it shows shots/inhale.pngThe inhale phase, 2 of 4, on a fake clock, no microphone. How to verify
- Run the checks at the default inputs, without a network.
- Walk through the scripted playthroughs, fixture lookups or goldens named in the requirements; each must match this file.
- Repeat once at the person's inputs when they differ from the defaults.
- Phase timing is tested with a fake clock, and optionally with a fixture breath signal. No microphone is required or permitted in the checks. Golden inhale, hold, and exhale frames are taken. This is not a medical device. No network.
# Design This file fixes the parts that are easy to get wrong. The language and tools are up to you, as long as the numbers here hold. ## Scale For a circle, radius goes from 40% to 100% of a max during inhale, holds at 100%, and returns to 40% during exhale, with a linear ease. Exact values at mid-phase are in `fixtures/breath-scale.json`. Hold duration is 2 seconds when the option is on, 0 when off. There is no hold-after-exhale in this version. ## Screenshot tolerance 8 levels, 98% of pixels. ## Inputs | Key | Label | Default | Notes | | --- | --- | --- | --- | | `title` | Title | In, then out | Shown above the guide. | | `inhale` | Inhale, seconds | 4 | From 2 to 8. | | `exhale` | Exhale, seconds | 6 | From 2 to 10. | | `hold` | A hold after inhale | on | A hold of `hold_seconds` (default 2) after each inhale. | | `sound` | A soft cue | off | Tests may mock audio. | | `shape` | Shape | circle | How the phase is drawn. | ## Acceptance at the defaults The numbers, names and fixture paths already in this file are the authority. Where a later table or a shipped fixture file disagrees with prose, the table or the fixture wins. | Fixture | Role | | --- | --- | | `design.md` | A shipped fixture. The build may move it, but then `design.md` must name the new path. | | `fixtures/breath-scale.json` | A shipped fixture. The build may move it, but then `design.md` must name the new path. | | `spekkr.inputs.json` | A shipped fixture. The build may move it, but then `design.md` must name the new path. | Golden frames are compared at 1400 by 1000 CSS pixels unless a requirement names another size. Tolerance, unless a tighter figure is given above: 8 levels, 98% of pixels, with motion, cursors and clocks frozen as this file says. A build's goldens are of that build; they do not have to match a shipped reference preview pixel-for-pixel if the tool or the type is different, but they do have to match this file's layout, counts and copy. ## Screenshots These pictures are headless-Chrome captures of the working reference in `reference/preview.html`, at the default inputs. They are not drawings of a product that has not been built. The first picture is the one Spekkr shows on the spec's card. A build may ship its own goldens; those goldens are of that build and do not have to match these frames pixel-for-pixel. | File | What it shows | | --- | --- | | `shots/inhale.png` | The inhale phase, 2 of 4, on a fake clock, no microphone. | ## How to verify 1. Run the checks at the default inputs, without a network. 2. Walk through the scripted playthroughs, fixture lookups or goldens named in the requirements; each must match this file. 3. Repeat once at the person's inputs when they differ from the defaults. 4. Phase timing is tested with a fake clock, and optionally with a fixture breath signal. No microphone is required or permitted in the checks. Golden inhale, hold, and exhale frames are taken. This is not a medical device. No network.
-
tasks.mdBuild tasks in order, each with a check.Tasks
Work in order. Finish a task's check before starting the next.
- Set up. Set up a web app (or the stack you have chosen) and a test runner that can open a page, click, and compare screenshots. Read
spekkr.inputs.jsonfirst. Check: a blank or heading page loads, and an empty test run passes. - Phases (R1). Build what
R1. Phasesasks for, to the numbers indesign.md. In particular: With inhale 4, hold on (2 s), exhale 6, a cycle is 12 seconds. At injected t = 0–4 the phase is inhale, 4–6 hold, 6–12 exhale, then it repeats. Check: theR1. Phasesacceptance checks pass. - Frames and files (R2). Build what
R2. Frames and filesasks for, to the numbers indesign.md. In particular: Goldens at mid-inhale, mid-hold, mid-exhale, and the end of a cycle. Check: theR2. Frames and filesacceptance checks pass. - Inputs (R3). Build what
R3. Inputsasks for, to the numbers indesign.md. In particular: The build readsspekkr.inputs.json. Settings label the UI, options turn features on or off, and a swap must be one of its choices. Check: theR3. Inputsacceptance checks pass. - Checks and report (R4). Build what
R4. Checks and reportasks for, to the numbers indesign.md. In particular: One command runs every acceptance check at the defaults and at the person's inputs, including golden frames where a requirement asks for them. Check: theR4. Checks and reportacceptance checks pass. - Goldens. Capture the frames named in
design.mdat the defaults, with motion frozen where the file says so. Compare them within the stated tolerance. Check: the frames match, and a pixel-level check fails if a documented element is removed on purpose. - Finish. Write a README that says how to install what is needed, how to change the inputs, and how to run the checks. Run the one command from a clean folder. Check: every item under Definition of done in
spec.mdis true.
# Tasks Work in order. Finish a task's check before starting the next. 1. **Set up.** Set up a web app (or the stack you have chosen) and a test runner that can open a page, click, and compare screenshots. Read `spekkr.inputs.json` first. Check: a blank or heading page loads, and an empty test run passes. 2. **Phases (R1).** Build what `R1. Phases` asks for, to the numbers in `design.md`. In particular: With inhale 4, hold on (2 s), exhale 6, a cycle is 12 seconds. At injected t = 0–4 the phase is inhale, 4–6 hold, 6–12 exhale, then it repeats. Check: the `R1. Phases` acceptance checks pass. 3. **Frames and files (R2).** Build what `R2. Frames and files` asks for, to the numbers in `design.md`. In particular: Goldens at mid-inhale, mid-hold, mid-exhale, and the end of a cycle. Check: the `R2. Frames and files` acceptance checks pass. 4. **Inputs (R3).** Build what `R3. Inputs` asks for, to the numbers in `design.md`. In particular: The build reads `spekkr.inputs.json`. Settings label the UI, options turn features on or off, and a swap must be one of its choices. Check: the `R3. Inputs` acceptance checks pass. 5. **Checks and report (R4).** Build what `R4. Checks and report` asks for, to the numbers in `design.md`. In particular: One command runs every acceptance check at the defaults and at the person's inputs, including golden frames where a requirement asks for them. Check: the `R4. Checks and report` acceptance checks pass. 6. **Goldens.** Capture the frames named in `design.md` at the defaults, with motion frozen where the file says so. Compare them within the stated tolerance. Check: the frames match, and a pixel-level check fails if a documented element is removed on purpose. 7. **Finish.** Write a README that says how to install what is needed, how to change the inputs, and how to run the checks. Run the one command from a clean folder. Check: every item under Definition of done in `spec.md` is true.
- Set up. Set up a web app (or the stack you have chosen) and a test runner that can open a page, click, and compare screenshots. Read
-
reference/preview.htmlA working reference preview of the default view, used to make the listing pictures. A build does not have to start from this file. -
reference/fonts/fonts.cssWebfont faces for the reference preview. -
reference/fonts/Geist.ttfGeist variable typeface for the reference preview. -
reference/fonts/Fraunces.ttfFraunces variable typeface for the reference preview. -
reference/fonts/Fraunces-Italic.ttfFraunces italic variable typeface for the reference preview.
Is it for me?
- Kind
- small site
- Platforms
- web
- Tools
- TypeScript
What does it need?
- Agent permissions
- shell
- Commands it runs
install a test runnerinstall a tool that compares screenshots
What changed?
- 0.2.215 Nov 2026Names what it builds.
- 0.2.114 Nov 2026Add animated loop to the listing shots.
- 0.2.014 Nov 2026Polished reference preview and new listing shots, including a short loop.
- 0.1.014 Nov 2026First version.
For agents: start.md says how to build this spec, spec.json holds everything on this page, and bundle.tar.gz holds its files.