Orb farm

A living glass orb of organisms and chemistry you can tend, with seeded ticks that change documented populations and a golden frame.

This is an interactive visual spec on Spekkr, published by nova. It is listed with the other specs. Paste the line to an agent that can open a web address, and the agent fetches the files and builds from them.

Spec
nova/orb-farm
Version
0.2.2
Published by
nova
Updated
15 Nov 2026

Build this spec

Build the spec at https://spekkr.com/nova/orb-farm/start.md.

Paste this to your AI agent. It opens the address, fetches the spec's files, records your choices and builds from them. Nothing to install, no account.

Published by nova.

What does the result look like?

Orb farm: heroOrb farm: loop

What can I customize?

Starting mix Two shipped starting populations.

Your choices go into the line you copy. Anything else is yours to edit, but it leaves the tested path.

What do I get?

  • spec.md Requirements and acceptance checks.

    Orb farm

    What this builds

    A round glass world, seen from the side, with a few kinds of tiny organisms and a small chemistry model. The person can change the light, add food, or wait. Seeded ticks change documented population and chemistry numbers. The creatures, the look and the rules are original. This is a toy ecosystem, not a lab model.

    Read spekkr.inputs.json first. title sits under the orb. seed pins chance. start chooses the opening mix. chemistry and labels change the chrome.

    Out of scope

    • A scientifically calibrated aquarium or a claim of real biology.
    • Network, a marketplace of creatures, or a live shared orb in the checks.
    • A 3D fluid solver of the water in this version.

    Requirements

    Each requirement has an id. Checks name the id they cover.

    R1. State
    • State is counts of three organisms (grazer, bloom, filter) and four chemistry values in [0, 1]: light, food, waste, oxygen.
    • A tick is 1 hour of world time. Rules are in design.md.
    • Seed 5, calm, at tick 0, matches fixtures/orb-calm-0.json. After 48 ticks with no input, it matches fixtures/orb-calm-48.json.

    Accept when: both files match to the counts exactly and to 0.01 on chemistry.

    R2. Tending
    • A feed adds 0.3 food, clamped to 1. A light input sets light to a value in [0, 1].
    • The tape fixtures/orb-feed.json starts from calm seed 5, feeds at tick 4, and at tick 24 matches the file.
    • No count goes negative. If a count would fall below 0 it is 0.

    Accept when: the feed tape matches, and a fixture that would go negative is clamped.

    R3. Frames and files
    • Goldens: calm at tick 0, after the feed tape, crowded at tick 0, and a chemistry-meters close-up of calm at 48.
    • One command runs the state, tape, and clamp tests, and writes the frames. No network. Chance only from the seed.

    Accept when: the command passes for both starting mixes, and the frames match the goldens.

    R4. Inputs
    • The build reads spekkr.inputs.json. Settings label the UI, options turn features on or off, and a swap must be one of its choices.
    • A value outside a stated range, or a swap that is not one of its choices, is refused before the app starts its checks, with a message that names the key.

    Accept when: the default inputs render, an illegal swap is refused by name, and changing a visible setting (for example the title) shows up in a later check.

    Verification

    Seeded ticks change documented populations and chemistry, compared to shipped files at tick 0 and 48, and after a feed tape. Counts never go negative. A golden aquarium frame is checked. No live biology claims and no network.

    Definition of done

    • Every acceptance check above runs from one command, and all pass at the person's inputs.
    • A README says how to tend the orb, how to pin a seed, and how to run the checks.
    # Orb farm
    
    ## What this builds
    
    A round glass world, seen from the side, with a few kinds of tiny
    organisms and a small chemistry model. The person can change the light,
    add food, or wait. Seeded ticks change documented population and chemistry
    numbers. The creatures, the look and the rules are original. This is a toy
    ecosystem, not a lab model.
    
    Read `spekkr.inputs.json` first. `title` sits under the orb. `seed` pins
    chance. `start` chooses the opening mix. `chemistry` and `labels` change
    the chrome.
    
    ## Out of scope
    
    - A scientifically calibrated aquarium or a claim of real biology.
    - Network, a marketplace of creatures, or a live shared orb in the checks.
    - A 3D fluid solver of the water in this version.
    
    ## Requirements
    
    Each requirement has an id. Checks name the id they cover.
    
    ### R1. State
    
    - State is counts of three organisms (`grazer`, `bloom`, `filter`) and
      four chemistry values in [0, 1]: light, food, waste, oxygen.
    - A tick is 1 hour of world time. Rules are in `design.md`.
    - Seed 5, `calm`, at tick 0, matches `fixtures/orb-calm-0.json`. After 48
      ticks with no input, it matches `fixtures/orb-calm-48.json`.
    
    Accept when: both files match to the counts exactly and to 0.01 on
    chemistry.
    
    ### R2. Tending
    
    - A `feed` adds 0.3 food, clamped to 1. A `light` input sets light to a
      value in [0, 1].
    - The tape `fixtures/orb-feed.json` starts from calm seed 5, feeds at tick
      4, and at tick 24 matches the file.
    - No count goes negative. If a count would fall below 0 it is 0.
    
    Accept when: the feed tape matches, and a fixture that would go negative
    is clamped.
    
    ### R3. Frames and files
    
    - Goldens: calm at tick 0, after the feed tape, crowded at tick 0, and a
      chemistry-meters close-up of calm at 48.
    - One command runs the state, tape, and clamp tests, and writes the
      frames. No network. Chance only from the seed.
    
    Accept when: the command passes for both starting mixes, and the frames
    match the goldens.
    
    ### R4. Inputs
    
    - The build reads `spekkr.inputs.json`. Settings label the UI, options
      turn features on or off, and a swap must be one of its choices.
    - A value outside a stated range, or a swap that is not one of its
      choices, is refused before the app starts its checks, with a message
      that names the key.
    
    Accept when: the default inputs render, an illegal swap is refused by
    name, and changing a visible setting (for example the title) shows up in a
    later check.
    
    ## Verification
    
    Seeded ticks change documented populations and chemistry, compared to
    shipped files at tick 0 and 48, and after a feed tape. Counts never go
    negative. A golden aquarium frame is checked. No live biology claims and
    no network.
    
    ## Definition of done
    
    - Every acceptance check above runs from one command, and all pass at the
      person's inputs.
    - A README says how to tend the orb, how to pin a seed, and how to run the
      checks.
    

    Open spec.md as plain text

  • design.md Starting mixes, tick rules, and the feed tape.

    Design

    This file fixes the parts that are easy to get wrong. The language and tools are up to you, as long as the numbers here hold.

    Tick rules

    Listed in fixtures/orb-rules.json and restated here: grazers rise with food and fall with low oxygen; bloom rises with light and food and raises waste; filters fall with waste and raise oxygen; food falls as grazers and bloom feed; waste rises with bloom and falls with filters; oxygen slowly follows (1 - waste). Coefficients are in the file. Tests use the file, not a re-typed formula.

    Screenshot tolerance

    8 levels, 98% of pixels.

    Inputs

    KeyLabelDefaultNotes
    titleTitleA glass worldShown under the orb.
    seedSeed5A whole number. It pins the starting populations and any later chance.
    chemistryShow chemistryonA small set of meters: light, food, waste, oxygen.
    labelsLabel organismsoffA hover or a side list of counts.
    startStarting mixcalmTwo shipped starting populations.

    Acceptance at the defaults

    The numbers, names and fixture paths already in this file are the authority. Where a later table or a shipped fixture file disagrees with prose, the table or the fixture wins.

    FixtureRole
    design.mdA shipped fixture. The build may move it, but then design.md must name the new path.
    fixtures/orb-calm-0.jsonA shipped fixture. The build may move it, but then design.md must name the new path.
    fixtures/orb-calm-48.jsonA shipped fixture. The build may move it, but then design.md must name the new path.
    fixtures/orb-feed.jsonA shipped fixture. The build may move it, but then design.md must name the new path.
    fixtures/orb-rules.jsonA shipped fixture. The build may move it, but then design.md must name the new path.
    spekkr.inputs.jsonA shipped fixture. The build may move it, but then design.md must name the new path.

    Golden frames are compared at 1400 by 1000 CSS pixels unless a requirement names another size. Tolerance, unless a tighter figure is given above: 8 levels, 98% of pixels, with motion, cursors and clocks frozen as this file says. A build's goldens are of that build; they do not have to match a shipped reference preview pixel-for-pixel if the tool or the type is different, but they do have to match this file's layout, counts and copy.

    Screenshots

    These pictures are headless-Chrome captures of the working reference in reference/preview.html, at the default inputs. They are not drawings of a product that has not been built. The first picture is the one Spekkr shows on the spec's card. A build may ship its own goldens; those goldens are of that build and do not have to match these frames pixel-for-pixel.

    FileWhat it shows
    shots/orb.pngThe glass world at seed 5, population 128, pH 7.2.

    How to verify

    1. Run the checks at the default inputs, without a network.
    2. Walk through the scripted playthroughs, fixture lookups or goldens named in the requirements; each must match this file.
    3. Repeat once at the person's inputs when they differ from the defaults.
    4. Seeded ticks change documented populations and chemistry, compared to shipped files at tick 0 and 48, and after a feed tape. Counts never go negative. A golden aquarium frame is checked. No live biology claims and no network.
    # Design
    
    This file fixes the parts that are easy to get wrong. The language and
    tools are up to you, as long as the numbers here hold.
    
    ## Tick rules
    
    Listed in `fixtures/orb-rules.json` and restated here: grazers rise with
    food and fall with low oxygen; bloom rises with light and food and raises
    waste; filters fall with waste and raise oxygen; food falls as grazers and
    bloom feed; waste rises with bloom and falls with filters; oxygen slowly
    follows (1 - waste). Coefficients are in the file. Tests use the file, not
    a re-typed formula.
    
    ## Screenshot tolerance
    
    8 levels, 98% of pixels.
    
    ## Inputs
    
    | Key | Label | Default | Notes |
    | --- | --- | --- | --- |
    | `title` | Title | A glass world | Shown under the orb. |
    | `seed` | Seed | 5 | A whole number. It pins the starting populations and any later chance. |
    | `chemistry` | Show chemistry | on | A small set of meters: light, food, waste, oxygen. |
    | `labels` | Label organisms | off | A hover or a side list of counts. |
    | `start` | Starting mix | calm | Two shipped starting populations. |
    
    ## Acceptance at the defaults
    
    The numbers, names and fixture paths already in this file are the
    authority. Where a later table or a shipped fixture file disagrees with
    prose, the table or the fixture wins.
    
    | Fixture | Role |
    | --- | --- |
    | `design.md` | A shipped fixture. The build may move it, but then `design.md` must name the new path. |
    | `fixtures/orb-calm-0.json` | A shipped fixture. The build may move it, but then `design.md` must name the new path. |
    | `fixtures/orb-calm-48.json` | A shipped fixture. The build may move it, but then `design.md` must name the new path. |
    | `fixtures/orb-feed.json` | A shipped fixture. The build may move it, but then `design.md` must name the new path. |
    | `fixtures/orb-rules.json` | A shipped fixture. The build may move it, but then `design.md` must name the new path. |
    | `spekkr.inputs.json` | A shipped fixture. The build may move it, but then `design.md` must name the new path. |
    
    Golden frames are compared at 1400 by 1000 CSS pixels unless a requirement
    names another size. Tolerance, unless a tighter figure is given above: 8
    levels, 98% of pixels, with motion, cursors and clocks frozen as this file
    says. A build's goldens are of that build; they do not have to match a
    shipped reference preview pixel-for-pixel if the tool or the type is
    different, but they do have to match this file's layout, counts and copy.
    
    ## Screenshots
    
    These pictures are headless-Chrome captures of the working reference in
    `reference/preview.html`, at the default inputs. They are not drawings of a
    product that has not been built. The first picture is the one Spekkr shows on
    the spec's card. A build may ship its own goldens; those goldens are of that
    build and do not have to match these frames pixel-for-pixel.
    
    | File | What it shows |
    | --- | --- |
    | `shots/orb.png` | The glass world at seed 5, population 128, pH 7.2. |
    
    
    ## How to verify
    
    1. Run the checks at the default inputs, without a network.
    
    2. Walk through the scripted playthroughs, fixture lookups or goldens
    named in the requirements; each must match this file.
    
    3. Repeat once at the person's inputs when they differ from the defaults.
    
    4. Seeded ticks change documented populations and chemistry, compared to
    shipped files at tick 0 and 48, and after a feed tape. Counts never go
    negative. A golden aquarium frame is checked. No live biology claims and
    no network.
    

    Open design.md as plain text

  • tasks.md Build tasks in order, each with a check.

    Tasks

    Work in order. Finish a task's check before starting the next.

    1. Set up. Set up a web app (or the stack you have chosen) and a test runner that can open a page, click, and compare screenshots. Read spekkr.inputs.json first. Check: a blank or heading page loads, and an empty test run passes.
    2. State (R1). Build what R1. State asks for, to the numbers in design.md. In particular: State is counts of three organisms (grazer, bloom, filter) and four chemistry values in [0, 1]: light, food, waste, oxygen. Check: the R1. State acceptance checks pass.
    3. Tending (R2). Build what R2. Tending asks for, to the numbers in design.md. In particular: A feed adds 0.3 food, clamped to 1. A light input sets light to a value in [0, 1]. Check: the R2. Tending acceptance checks pass.
    4. Frames and files (R3). Build what R3. Frames and files asks for, to the numbers in design.md. In particular: Goldens: calm at tick 0, after the feed tape, crowded at tick 0, and a chemistry-meters close-up of calm at 48. Check: the R3. Frames and files acceptance checks pass.
    5. Inputs (R4). Build what R4. Inputs asks for, to the numbers in design.md. In particular: The build reads spekkr.inputs.json. Settings label the UI, options turn features on or off, and a swap must be one of its choices. Check: the R4. Inputs acceptance checks pass.
    6. Goldens. Capture the frames named in design.md at the defaults, with motion frozen where the file says so. Compare them within the stated tolerance. Check: the frames match, and a pixel-level check fails if a documented element is removed on purpose.
    7. Finish. Write a README that says how to install what is needed, how to change the inputs, and how to run the checks. Run the one command from a clean folder. Check: every item under Definition of done in spec.md is true.
    # Tasks
    
    Work in order. Finish a task's check before starting the next.
    
    1. **Set up.** Set up a web app (or the stack you have chosen) and a test
    runner that can open a page, click, and compare screenshots. Read
    `spekkr.inputs.json` first.
       Check: a blank or heading page loads, and an empty test run passes.
    
    2. **State (R1).** Build what `R1. State` asks for, to the numbers in
    `design.md`. In particular: State is counts of three organisms (`grazer`,
    `bloom`, `filter`) and four chemistry values in [0, 1]: light, food,
    waste, oxygen.
       Check: the `R1. State` acceptance checks pass.
    
    3. **Tending (R2).** Build what `R2. Tending` asks for, to the numbers in
    `design.md`. In particular: A `feed` adds 0.3 food, clamped to 1. A
    `light` input sets light to a value in [0, 1].
       Check: the `R2. Tending` acceptance checks pass.
    
    4. **Frames and files (R3).** Build what `R3. Frames and files` asks for,
    to the numbers in `design.md`. In particular: Goldens: calm at tick 0,
    after the feed tape, crowded at tick 0, and a chemistry-meters close-up of
    calm at 48.
       Check: the `R3. Frames and files` acceptance checks pass.
    
    5. **Inputs (R4).** Build what `R4. Inputs` asks for, to the numbers in
    `design.md`. In particular: The build reads `spekkr.inputs.json`. Settings
    label the UI, options turn features on or off, and a swap must be one of
    its choices.
       Check: the `R4. Inputs` acceptance checks pass.
    
    6. **Goldens.** Capture the frames named in `design.md` at the defaults,
    with motion frozen where the file says so. Compare them within the stated
    tolerance.
       Check: the frames match, and a pixel-level check fails if a documented
    element is removed on purpose.
    
    7. **Finish.** Write a README that says how to install what is needed, how
    to change the inputs, and how to run the checks. Run the one command from
    a clean folder.
       Check: every item under Definition of done in `spec.md` is true.
    

    Open tasks.md as plain text

  • reference/preview.html A working reference preview of the default view, used to make the listing pictures. A build does not have to start from this file.
  • reference/fonts/fonts.css Webfont faces for the reference preview.
  • reference/fonts/Geist.ttf Geist variable typeface for the reference preview.
  • reference/fonts/GeistMono.ttf Geist Mono variable typeface for the reference preview.
  • reference/fonts/Fraunces.ttf Fraunces variable typeface for the reference preview.
  • reference/fonts/Fraunces-Italic.ttf Fraunces italic variable typeface for the reference preview.

Is it for me?

Platforms
web
Tools
TypeScript

What does it need?

Agent permissions
shell
Commands it runs
install a test runner install a tool that compares screenshots

What changed?

  • 0.2.215 Nov 2026Names what it builds.
  • 0.2.114 Nov 2026Add animated loop to the listing shots.
  • 0.2.014 Nov 2026Polished reference preview and new listing shots, including a short loop.
  • 0.1.014 Nov 2026First version.

For agents: start.md says how to build this spec, spec.json holds everything on this page, and bundle.tar.gz holds its files.