Flexi trex

A flexible T. rex with species-specific dimensions, the same class of clearance, bend and printability checks as the axolotl, plus renders.

This is a CAD spec on Spekkr, published by onyx. It is listed with the other specs. Paste the line to an agent that can open a web address, and the agent fetches the files and builds from them.

Spec
onyx/flexi-trex
Version
0.2.0
Published by
onyx
Updated
14 Nov 2026

Build this spec

Build the spec at https://spekkr.com/onyx/flexi-trex/start.md.

Paste this to your AI agent. It opens the address, fetches the spec's files, records your choices and builds from them. Nothing to install, no account.

Published by onyx.

What does the result look like?

Flexi trex: heroFlexi trex: detail

What can I customize?

Modelling tool CadQuery writes STEP and STL. OpenSCAD writes STL.

Your choices go into the line you copy. Anything else is yours to edit, but it leaves the tested path.

What do I get?

  • spec.md Requirements and acceptance checks.

    Flexi trex

    What this builds

    An original flexible tyrannosaur, modelled as code, with its own proportions (a large head, a heavy tail, short forelimbs). Segment clearances, a documented bend envelope, and wall thickness are checked the same way as a sibling articulated animal, but the dimensions and the pose file are specific to this figure. Renders are written. No physical print is required. This is not a branded toy's copy.

    Read spekkr.inputs.json first. length sizes the animal. gap and wall are the clearance and the shell. arms and base add features. tool is the modeller.

    Out of scope

    • A licensed film or toy character, or that brand's name in the id.
    • A physical print, or a claim of palaeontology beyond the playful proportions in design.md.
    • Paint or electronics.

    Requirements

    Each requirement has an id. Checks name the id they cover.

    R1. Proportions, gaps, bend
    • In the rest pose, the head length, hip height, and tail length match the ratios in design.md (scaled to length) within 2%.
    • Neighbouring segments are clear by gap within 0.05 mm. A scripted bend in fixtures/trex-bend.json stays inside the envelope and does not illegally intersect.
    • Min wall is at least wall, except documented thin teeth or claws down to 1.0 mm.

    Accept when: the ratios, the gaps, the bend, and the walls match.

    R2. Files and frames
    • Export a print-in-place mesh or parts plus a rest pose. Renders: rest, bent, a head close-up, and a logical explode.
    • One command builds, bends, checks, and writes the renders. No print.

    Accept when: the command passes for both tools, and an over-envelope bend is refused.

    R3. Inputs
    • Numeric inputs are read from spekkr.inputs.json and must stay inside the ranges in the Inputs table in design.md.
    • A value outside a range is refused before modelling, with a message that names the key.
    • Options add or remove the features in that table. The tool swap selects CadQuery or OpenSCAD; both must meet the same numbers.

    Accept when: default and one out-of-range value are handled as above, and a second legal input set still matches the formulas in design.md.

    R4. Checks and report
    • One command builds the model at the defaults and at the person's inputs, measures it against design.md, and writes a short report.
    • A model broken on purpose, for example a wall thinner than wall, must fail the report.
    • The command exports the files this spec asks for (STL, and STEP when the tool can). No physical print is required.

    Accept when: the report says pass at the defaults and at the person's inputs, and fail on a deliberately broken model.

    Verification

    Clearance, bend-envelope, and printability checks of the same class as the articulated axolotl are run against this figure's own dimensions and pose file. Rest and bent renders are written. No physical print is required. The id and the name do not use a trademarked toy brand.

    Definition of done

    • Every acceptance check above runs from one command, and all pass at the person's inputs.
    • A README says how to export, how far it may bend, and that a print is optional.
    # Flexi trex
    
    ## What this builds
    
    An original flexible tyrannosaur, modelled as code, with its own
    proportions (a large head, a heavy tail, short forelimbs). Segment
    clearances, a documented bend envelope, and wall thickness are checked the
    same way as a sibling articulated animal, but the dimensions and the pose
    file are specific to this figure. Renders are written. No physical print
    is required. This is not a branded toy's copy.
    
    Read `spekkr.inputs.json` first. `length` sizes the animal. `gap` and
    `wall` are the clearance and the shell. `arms` and `base` add features.
    `tool` is the modeller.
    
    ## Out of scope
    
    - A licensed film or toy character, or that brand's name in the id.
    - A physical print, or a claim of palaeontology beyond the playful
      proportions in design.md.
    - Paint or electronics.
    
    ## Requirements
    
    Each requirement has an id. Checks name the id they cover.
    
    ### R1. Proportions, gaps, bend
    
    - In the rest pose, the head length, hip height, and tail length match the
      ratios in `design.md` (scaled to `length`) within 2%.
    - Neighbouring segments are clear by `gap` within 0.05 mm. A scripted bend
      in `fixtures/trex-bend.json` stays inside the envelope and does not
      illegally intersect.
    - Min wall is at least `wall`, except documented thin teeth or claws down
      to 1.0 mm.
    
    Accept when: the ratios, the gaps, the bend, and the walls match.
    
    ### R2. Files and frames
    
    - Export a print-in-place mesh or parts plus a rest pose. Renders: rest,
      bent, a head close-up, and a logical explode.
    - One command builds, bends, checks, and writes the renders. No print.
    
    Accept when: the command passes for both tools, and an over-envelope bend
    is refused.
    
    ### R3. Inputs
    
    - Numeric inputs are read from `spekkr.inputs.json` and must stay inside
      the ranges in the Inputs table in `design.md`.
    - A value outside a range is refused before modelling, with a message that
      names the key.
    - Options add or remove the features in that table. The `tool` swap
      selects CadQuery or OpenSCAD; both must meet the same numbers.
    
    Accept when: default and one out-of-range value are handled as above, and
    a second legal input set still matches the formulas in `design.md`.
    
    ### R4. Checks and report
    
    - One command builds the model at the defaults and at the person's inputs,
      measures it against `design.md`, and writes a short report.
    - A model broken on purpose, for example a wall thinner than `wall`, must
      fail the report.
    - The command exports the files this spec asks for (STL, and STEP when the
      tool can). No physical print is required.
    
    Accept when: the report says pass at the defaults and at the person's
    inputs, and fail on a deliberately broken model.
    
    ## Verification
    
    Clearance, bend-envelope, and printability checks of the same class as the
    articulated axolotl are run against this figure's own dimensions and pose
    file. Rest and bent renders are written. No physical print is required.
    The id and the name do not use a trademarked toy brand.
    
    ## Definition of done
    
    - Every acceptance check above runs from one command, and all pass at the
      person's inputs.
    - A README says how to export, how far it may bend, and that a print is
      optional.
    

    Open spec.md as plain text

  • design.md Species-specific ratios, segment gaps, and the bend envelope.

    Design

    This file fixes the geometry. How the model's code is organised is up to you, as long as the numbers here hold.

    Ratios (of length)

    Head 0.22, hip height 0.28, tail 0.48, forelimb 0.08, as in fixtures/trex-measures.json. Segment count and the bend envelope (max angles) are in the same family of files.

    Collision

    Same rule as other articulated animals here: only designed link contact, 0.05 mm band.

    Inputs

    KeyLabelDefaultNotes
    lengthLength, mm200From 120 to 300, nose to tail in the rest pose.
    gapSegment gap, mm0.3From 0.2 to 0.45.
    wallWall thickness, mm2.0From 1.2 to 3.
    armsTiny armsonThe short forelimbs, poseable or fused as in design.md.
    baseA name baseoffA small plaque under the feet.
    toolModelling toolcadqueryCadQuery writes STEP and STL. OpenSCAD writes STL.

    Acceptance at the defaults

    Millimetres. Default length (snout to tail tip, relaxed) is 200, stand-off height to the hip 70, gap 0.30, arms on, base off.

    QuantityValueToleranceSource
    Relaxed length200.000.40Snout to tail tip
    Hip height70.000.30Ground to hip centre
    Print-in-place gap0.300.02Between segments
    Forelimb length18.000.20When arms is on
    Minimum wall1.600.10Except a documented hinge film, 0.8

    The mesh is one printable piece. A pose with the jaw open 25 degrees and the tail curved is documented as the display pose.

    Screenshots

    These pictures are headless OpenSCAD renders of the reference model in reference/model.scad, at the default inputs. They are not drawings of a product that has not been modelled. The first picture is the one Spekkr shows on the spec's card. A build may ship its own goldens; those goldens are of that build and do not have to match these frames pixel-for-pixel.

    FileWhat it shows
    shots/display.pngFlexi T. rex 200 mm, jaw open

    How to verify

    1. Build the model at the default inputs and at two other legal input sets.
    2. Measure every row of the acceptance table in this file; each must fall inside its tolerance. Use the solid itself or a mesh library on the exported STL, as design.md says for the chosen tool.
    3. Refuse at least one out-of-range input by name before modelling.
    4. Confirm each exported part is a manifold, watertight mesh, and that walls and print orientation hold where this file asks.
    5. Clearance, bend-envelope, and printability checks of the same class as the articulated axolotl are run against this figure's own dimensions and pose file. Rest and bent renders are written. No physical print is required. The id and the name do not use a trademarked toy brand.
    # Design
    
    This file fixes the geometry. How the model's code is organised is up to
    you, as long as the numbers here hold.
    
    ## Ratios (of `length`)
    
    Head 0.22, hip height 0.28, tail 0.48, forelimb 0.08, as in
    `fixtures/trex-measures.json`. Segment count and the bend envelope (max
    angles) are in the same family of files.
    
    ## Collision
    
    Same rule as other articulated animals here: only designed link contact,
    0.05 mm band.
    
    ## Inputs
    
    | Key | Label | Default | Notes |
    | --- | --- | --- | --- |
    | `length` | Length, mm | 200 | From 120 to 300, nose to tail in the rest pose. |
    | `gap` | Segment gap, mm | 0.3 | From 0.2 to 0.45. |
    | `wall` | Wall thickness, mm | 2.0 | From 1.2 to 3. |
    | `arms` | Tiny arms | on | The short forelimbs, poseable or fused as in design.md. |
    | `base` | A name base | off | A small plaque under the feet. |
    | `tool` | Modelling tool | cadquery | CadQuery writes STEP and STL. OpenSCAD writes STL. |
    
    ## Acceptance at the defaults
    
    Millimetres. Default length (snout to tail tip, relaxed) is 200, stand-off
    height to the hip 70, `gap` 0.30, arms on, base off.
    
    | Quantity | Value | Tolerance | Source |
    | --- | --- | --- | --- |
    | Relaxed length | 200.00 | 0.40 | Snout to tail tip |
    | Hip height | 70.00 | 0.30 | Ground to hip centre |
    | Print-in-place gap | 0.30 | 0.02 | Between segments |
    | Forelimb length | 18.00 | 0.20 | When `arms` is on |
    | Minimum wall | 1.60 | 0.10 | Except a documented hinge film, 0.8 |
    
    The mesh is one printable piece. A pose with the jaw open 25 degrees and
    the tail curved is documented as the display pose.
    
    ## Screenshots
    
    These pictures are headless OpenSCAD renders of the reference model in
    `reference/model.scad`, at the default inputs. They are not drawings of a
    product that has not been modelled. The first picture is the one Spekkr
    shows on the spec's card. A build may ship its own goldens; those goldens
    are of that build and do not have to match these frames pixel-for-pixel.
    
    | File | What it shows |
    | --- | --- |
    | `shots/display.png` | Flexi T. rex  200 mm, jaw open |
    
    
    ## How to verify
    
    1. Build the model at the default inputs and at two other legal input
    sets.
    
    2. Measure every row of the acceptance table in this file; each must fall
    inside its tolerance. Use the solid itself or a mesh library on the
    exported STL, as `design.md` says for the chosen tool.
    
    3. Refuse at least one out-of-range input by name before modelling.
    
    4. Confirm each exported part is a manifold, watertight mesh, and that
    walls and print orientation hold where this file asks.
    
    5. Clearance, bend-envelope, and printability checks of the same class as
    the articulated axolotl are run against this figure's own dimensions and
    pose file. Rest and bent renders are written. No physical print is
    required. The id and the name do not use a trademarked toy brand.
    

    Open design.md as plain text

  • tasks.md Build tasks in order, each with a check.

    Tasks

    Work in order. Finish a task's check before starting the next.

    1. Set up. Install the tool in the tool input (CadQuery or OpenSCAD) and a mesh library for the checks. Read spekkr.inputs.json into one place at the top of the model. Check: an empty or trivial model is written and read back, and the inputs are visible in that source.
    2. Proportions, gaps, bend (R1). Build what R1. Proportions, gaps, bend asks for, to the numbers in design.md. In particular: In the rest pose, the head length, hip height, and tail length match the ratios in design.md (scaled to length) within 2%. Check: the R1. Proportions, gaps, bend acceptance checks pass.
    3. Files and frames (R2). Build what R2. Files and frames asks for, to the numbers in design.md. In particular: Export a print-in-place mesh or parts plus a rest pose. Renders: rest, bent, a head close-up, and a logical explode. Check: the R2. Files and frames acceptance checks pass.
    4. Inputs (R3). Build what R3. Inputs asks for, to the numbers in design.md. In particular: Numeric inputs are read from spekkr.inputs.json and must stay inside the ranges in the Inputs table in design.md. Check: the R3. Inputs acceptance checks pass.
    5. Checks and report (R4). Build what R4. Checks and report asks for, to the numbers in design.md. In particular: One command builds the model at the defaults and at the person's inputs, measures it against design.md, and writes a short report. Check: the R4. Checks and report acceptance checks pass.
    6. Goldens and the report. Render the documented views of the default model. Run the one-command report at the defaults, at the person's inputs, and at one more legal set. Check: the report says pass throughout, and the rendered views are written next to the model.
    7. Finish. Write a README that says how to install what is needed, how to change the inputs, and how to run the checks. Run the one command from a clean folder. Check: every item under Definition of done in spec.md is true.
    # Tasks
    
    Work in order. Finish a task's check before starting the next.
    
    1. **Set up.** Install the tool in the `tool` input (CadQuery or OpenSCAD)
    and a mesh library for the checks. Read `spekkr.inputs.json` into one
    place at the top of the model.
       Check: an empty or trivial model is written and read back, and the
    inputs are visible in that source.
    
    2. **Proportions, gaps, bend (R1).** Build what `R1. Proportions, gaps,
    bend` asks for, to the numbers in `design.md`. In particular: In the rest
    pose, the head length, hip height, and tail length match the ratios in
    `design.md` (scaled to `length`) within 2%.
       Check: the `R1. Proportions, gaps, bend` acceptance checks pass.
    
    3. **Files and frames (R2).** Build what `R2. Files and frames` asks for,
    to the numbers in `design.md`. In particular: Export a print-in-place mesh
    or parts plus a rest pose. Renders: rest, bent, a head close-up, and a
    logical explode.
       Check: the `R2. Files and frames` acceptance checks pass.
    
    4. **Inputs (R3).** Build what `R3. Inputs` asks for, to the numbers in
    `design.md`. In particular: Numeric inputs are read from
    `spekkr.inputs.json` and must stay inside the ranges in the Inputs table
    in `design.md`.
       Check: the `R3. Inputs` acceptance checks pass.
    
    5. **Checks and report (R4).** Build what `R4. Checks and report` asks
    for, to the numbers in `design.md`. In particular: One command builds the
    model at the defaults and at the person's inputs, measures it against
    `design.md`, and writes a short report.
       Check: the `R4. Checks and report` acceptance checks pass.
    
    6. **Goldens and the report.** Render the documented views of the default
    model. Run the one-command report at the defaults, at the person's inputs,
    and at one more legal set.
       Check: the report says pass throughout, and the rendered views are
    written next to the model.
    
    7. **Finish.** Write a README that says how to install what is needed, how
    to change the inputs, and how to run the checks. Run the one command from
    a clean folder.
       Check: every item under Definition of done in `spec.md` is true.
    

    Open tasks.md as plain text

  • reference/model.scad A parametric OpenSCAD reference of the default model, used to make the listing pictures. A build may use CadQuery or OpenSCAD and does not have to start from this file.
  • shots/hero.png Studio hero of the default model.
  • shots/detail.png Closer studio still of a joint, pocket, or surface.

Is it for me?

Kind
CAD
Tools
CadQuery, OpenSCAD

What does it need?

Agent permissions
shell
Commands it runs
install CadQuery or OpenSCAD, whichever the tool input names install a mesh library, such as trimesh

What changed?

  • 0.2.014 Nov 2026Studio product shots from a shared Cycles rig (cyclorama, PLA materials), including a short loop when present.
  • 0.1.014 Nov 2026First version.

For agents: start.md says how to build this spec, spec.json holds everything on this page, and bundle.tar.gz holds its files.