Rugged box

A parametric rugged box: lid fit, latch engagement, gasket groove, stack height, and exploded plus closed renders, with no print required.

This is a CAD spec on Spekkr, published by onyx. It is listed with the other specs. Paste the line to an agent that can open a web address, and the agent fetches the files and builds from them.

Spec
onyx/rugged-box
Version
0.2.0
Published by
onyx
Updated
14 Nov 2026

Build this spec

Build the spec at https://spekkr.com/onyx/rugged-box/start.md.

Paste this to your AI agent. It opens the address, fetches the spec's files, records your choices and builds from them. Nothing to install, no account.

Published by onyx.

What does the result look like?

Rugged box: heroRugged box: detail

What can I customize?

Modelling tool CadQuery writes STEP and STL. OpenSCAD writes STL.

Your choices go into the line you copy. Anything else is yours to edit, but it leaves the tested path.

What do I get?

  • spec.md Requirements and acceptance checks.

    Rugged box

    What this builds

    A two-part rugged box, modelled as code: a base, a lid, an optional gasket groove, and optional latches. Lid fit, latch engagement, groove dimensions, and stack height are measured. Closed and exploded renders are written. No physical print, and no real gasket, are required. This is an original box, not a copy of a branded case.

    Read spekkr.inputs.json first. The inside is inner_length by inner_width by inner_height, walls wall, all millimetres. gasket and latches add features. tool is the modeller.

    Out of scope

    • A waterproofness certification, or a real gasket in the checks.
    • A branded case's exact latches, or its name in the id.
    • A physical print.

    Requirements

    Each requirement has an id. Checks name the id they cover.

    R1. Fit and features
    • The lid sits on the base with a 0.2 mm peripheral clearance, and the two solids do not overlap in the closed pose.
    • If gasket is on, the groove is the width and depth in design.md, on the documented path, and it does not break the wall thinner than 1.2 mm.
    • If latches is on, each latch's engagement (overlap of hook and catch in the closed pose) is the length in the file, and a kinematic close does not collide earlier than that.
    • Stack height (closed, overall Z) matches the formula in the file. Inputs outside range are refused.

    Accept when: clearance, non-overlap, groove, latch engagement, and stack height match, and a short-of-range input is refused.

    R2. Files and frames
    • Export base and lid (and latches if separate). Meshes watertight. Renders: closed, exploded, a latch close-up, and a groove section.
    • One command builds, measures, and writes the renders. No print, no gasket, no IP test.

    Accept when: the command passes for both tools, and a deliberately tight lid (zero clearance) fails the overlap check.

    R3. Inputs
    • Numeric inputs are read from spekkr.inputs.json and must stay inside the ranges in the Inputs table in design.md.
    • A value outside a range is refused before modelling, with a message that names the key.
    • Options add or remove the features in that table. The tool swap selects CadQuery or OpenSCAD; both must meet the same numbers.

    Accept when: default and one out-of-range value are handled as above, and a second legal input set still matches the formulas in design.md.

    R4. Checks and report
    • One command builds the model at the defaults and at the person's inputs, measures it against design.md, and writes a short report.
    • A model broken on purpose, for example a wall thinner than wall, must fail the report.
    • The command exports the files this spec asks for (STL, and STEP when the tool can). No physical print is required.

    Accept when: the report says pass at the defaults and at the person's inputs, and fail on a deliberately broken model.

    Verification

    Lid and base fit, latch engagement, gasket-groove dimensions, and stack height are measured on the meshes. Exploded and closed renders are written. No physical print, no real gasket, and no waterproofness test are required.

    Definition of done

    • Every acceptance check above runs from one command, and all pass at the person's inputs.
    • A README says how to export the parts, what the lid clearance was designed for, and that a print is optional.
    # Rugged box
    
    ## What this builds
    
    A two-part rugged box, modelled as code: a base, a lid, an optional gasket
    groove, and optional latches. Lid fit, latch engagement, groove
    dimensions, and stack height are measured. Closed and exploded renders are
    written. No physical print, and no real gasket, are required. This is an
    original box, not a copy of a branded case.
    
    Read `spekkr.inputs.json` first. The inside is `inner_length` by
    `inner_width` by `inner_height`, walls `wall`, all millimetres. `gasket`
    and `latches` add features. `tool` is the modeller.
    
    ## Out of scope
    
    - A waterproofness certification, or a real gasket in the checks.
    - A branded case's exact latches, or its name in the id.
    - A physical print.
    
    ## Requirements
    
    Each requirement has an id. Checks name the id they cover.
    
    ### R1. Fit and features
    
    - The lid sits on the base with a 0.2 mm peripheral clearance, and the two
      solids do not overlap in the closed pose.
    - If `gasket` is on, the groove is the width and depth in `design.md`, on
      the documented path, and it does not break the wall thinner than 1.2 mm.
    - If `latches` is on, each latch's engagement (overlap of hook and catch
      in the closed pose) is the length in the file, and a kinematic close
      does not collide earlier than that.
    - Stack height (closed, overall Z) matches the formula in the file. Inputs
      outside range are refused.
    
    Accept when: clearance, non-overlap, groove, latch engagement, and stack
    height match, and a short-of-range input is refused.
    
    ### R2. Files and frames
    
    - Export base and lid (and latches if separate). Meshes watertight.
      Renders: closed, exploded, a latch close-up, and a groove section.
    - One command builds, measures, and writes the renders. No print, no
      gasket, no IP test.
    
    Accept when: the command passes for both tools, and a deliberately tight
    lid (zero clearance) fails the overlap check.
    
    ### R3. Inputs
    
    - Numeric inputs are read from `spekkr.inputs.json` and must stay inside
      the ranges in the Inputs table in `design.md`.
    - A value outside a range is refused before modelling, with a message that
      names the key.
    - Options add or remove the features in that table. The `tool` swap
      selects CadQuery or OpenSCAD; both must meet the same numbers.
    
    Accept when: default and one out-of-range value are handled as above, and
    a second legal input set still matches the formulas in `design.md`.
    
    ### R4. Checks and report
    
    - One command builds the model at the defaults and at the person's inputs,
      measures it against `design.md`, and writes a short report.
    - A model broken on purpose, for example a wall thinner than `wall`, must
      fail the report.
    - The command exports the files this spec asks for (STL, and STEP when the
      tool can). No physical print is required.
    
    Accept when: the report says pass at the defaults and at the person's
    inputs, and fail on a deliberately broken model.
    
    ## Verification
    
    Lid and base fit, latch engagement, gasket-groove dimensions, and stack
    height are measured on the meshes. Exploded and closed renders are
    written. No physical print, no real gasket, and no waterproofness test are
    required.
    
    ## Definition of done
    
    - Every acceptance check above runs from one command, and all pass at the
      person's inputs.
    - A README says how to export the parts, what the lid clearance was
      designed for, and that a print is optional.
    

    Open spec.md as plain text

  • design.md Lid fit, latch engagement, gasket groove, and stack height.

    Design

    This file fixes the geometry. How the model's code is organised is up to you, as long as the numbers here hold.

    Formulas

    Outside is inside plus two walls, plus a documented rib. Closed height, groove (width 3.2, depth 1.8, unless the file says otherwise), and latch engagement (2.0 mm) are fixtures/rugged-measures.json.

    Print

    Base open up, lid groove up. Overhangs ≤ 45°, min wall wall except the groove neck.

    Inputs

    KeyLabelDefaultNotes
    inner_lengthInside length, mm120From 60 to 300.
    inner_widthInside width, mm80From 40 to 200.
    inner_heightInside height, mm50From 25 to 150.
    wallWall thickness, mm3.0From 2.0 to 6.
    gasketA gasket grooveonA groove in the lid path, sized in design.md.
    latchesLatchesonTwo latch features, with a documented engagement.
    toolModelling toolcadqueryCadQuery writes STEP and STL. OpenSCAD writes STL.

    Acceptance at the defaults

    Millimetres. Default inner length 80, inner width 50, inner height 30, wall 2.4, gasket and latches on.

    QuantityValueToleranceSource
    Closed overall X, Y, Z84.80, 54.80, 36.800.10inner + 2*wall in X and Y; Z includes lid
    Wall thickness2.400.05wall
    Gasket groove width, depth2.00, 1.200.05When gasket is on
    Latch engagement3.000.10Two latches, opposite short sides
    Rib height on the outside1.600.10Around the body

    The closed assembly has no intersection except the documented latch contact of at most 0.05 mm. Both parts are printable without support over 45 degrees except the listed latch underside.

    Screenshots

    These pictures are headless OpenSCAD renders of the reference model in reference/model.scad, at the default inputs. They are not drawings of a product that has not been modelled. The first picture is the one Spekkr shows on the spec's card. A build may ship its own goldens; those goldens are of that build and do not have to match these frames pixel-for-pixel.

    FileWhat it shows
    shots/closed.pngClosed box 84.8 × 54.8 × 36.8 mm
    shots/open.pngBase and lid, gasket groove visible

    How to verify

    1. Build the model at the default inputs and at two other legal input sets.
    2. Measure every row of the acceptance table in this file; each must fall inside its tolerance. Use the solid itself or a mesh library on the exported STL, as design.md says for the chosen tool.
    3. Refuse at least one out-of-range input by name before modelling.
    4. Confirm each exported part is a manifold, watertight mesh, and that walls and print orientation hold where this file asks.
    5. Lid and base fit, latch engagement, gasket-groove dimensions, and stack height are measured on the meshes. Exploded and closed renders are written. No physical print, no real gasket, and no waterproofness test are required.
    # Design
    
    This file fixes the geometry. How the model's code is organised is up to
    you, as long as the numbers here hold.
    
    ## Formulas
    
    Outside is inside plus two walls, plus a documented rib. Closed height,
    groove (width 3.2, depth 1.8, unless the file says otherwise), and latch
    engagement (2.0 mm) are `fixtures/rugged-measures.json`.
    
    ## Print
    
    Base open up, lid groove up. Overhangs ≤ 45°, min wall `wall` except the
    groove neck.
    
    ## Inputs
    
    | Key | Label | Default | Notes |
    | --- | --- | --- | --- |
    | `inner_length` | Inside length, mm | 120 | From 60 to 300. |
    | `inner_width` | Inside width, mm | 80 | From 40 to 200. |
    | `inner_height` | Inside height, mm | 50 | From 25 to 150. |
    | `wall` | Wall thickness, mm | 3.0 | From 2.0 to 6. |
    | `gasket` | A gasket groove | on | A groove in the lid path, sized in design.md. |
    | `latches` | Latches | on | Two latch features, with a documented engagement. |
    | `tool` | Modelling tool | cadquery | CadQuery writes STEP and STL. OpenSCAD writes STL. |
    
    ## Acceptance at the defaults
    
    Millimetres. Default inner length 80, inner width 50, inner height 30,
    wall 2.4, gasket and latches on.
    
    | Quantity | Value | Tolerance | Source |
    | --- | --- | --- | --- |
    | Closed overall X, Y, Z | 84.80, 54.80, 36.80 | 0.10 | `inner + 2*wall` in X and Y; Z includes lid |
    | Wall thickness | 2.40 | 0.05 | `wall` |
    | Gasket groove width, depth | 2.00, 1.20 | 0.05 | When `gasket` is on |
    | Latch engagement | 3.00 | 0.10 | Two latches, opposite short sides |
    | Rib height on the outside | 1.60 | 0.10 | Around the body |
    
    The closed assembly has no intersection except the documented latch
    contact of at most 0.05 mm. Both parts are printable without support over
    45 degrees except the listed latch underside.
    
    ## Screenshots
    
    These pictures are headless OpenSCAD renders of the reference model in
    `reference/model.scad`, at the default inputs. They are not drawings of a
    product that has not been modelled. The first picture is the one Spekkr
    shows on the spec's card. A build may ship its own goldens; those goldens
    are of that build and do not have to match these frames pixel-for-pixel.
    
    | File | What it shows |
    | --- | --- |
    | `shots/closed.png` | Closed box  84.8 × 54.8 × 36.8 mm |
    | `shots/open.png` | Base and lid, gasket groove visible |
    
    
    ## How to verify
    
    1. Build the model at the default inputs and at two other legal input
    sets.
    
    2. Measure every row of the acceptance table in this file; each must fall
    inside its tolerance. Use the solid itself or a mesh library on the
    exported STL, as `design.md` says for the chosen tool.
    
    3. Refuse at least one out-of-range input by name before modelling.
    
    4. Confirm each exported part is a manifold, watertight mesh, and that
    walls and print orientation hold where this file asks.
    
    5. Lid and base fit, latch engagement, gasket-groove dimensions, and stack
    height are measured on the meshes. Exploded and closed renders are
    written. No physical print, no real gasket, and no waterproofness test are
    required.
    

    Open design.md as plain text

  • tasks.md Build tasks in order, each with a check.

    Tasks

    Work in order. Finish a task's check before starting the next.

    1. Set up. Install the tool in the tool input (CadQuery or OpenSCAD) and a mesh library for the checks. Read spekkr.inputs.json into one place at the top of the model. Check: an empty or trivial model is written and read back, and the inputs are visible in that source.
    2. Fit and features (R1). Build what R1. Fit and features asks for, to the numbers in design.md. In particular: The lid sits on the base with a 0.2 mm peripheral clearance, and the two solids do not overlap in the closed pose. Check: the R1. Fit and features acceptance checks pass.
    3. Files and frames (R2). Build what R2. Files and frames asks for, to the numbers in design.md. In particular: Export base and lid (and latches if separate). Meshes watertight. Renders: closed, exploded, a latch close-up, and a groove section. Check: the R2. Files and frames acceptance checks pass.
    4. Inputs (R3). Build what R3. Inputs asks for, to the numbers in design.md. In particular: Numeric inputs are read from spekkr.inputs.json and must stay inside the ranges in the Inputs table in design.md. Check: the R3. Inputs acceptance checks pass.
    5. Checks and report (R4). Build what R4. Checks and report asks for, to the numbers in design.md. In particular: One command builds the model at the defaults and at the person's inputs, measures it against design.md, and writes a short report. Check: the R4. Checks and report acceptance checks pass.
    6. Goldens and the report. Render the documented views of the default model. Run the one-command report at the defaults, at the person's inputs, and at one more legal set. Check: the report says pass throughout, and the rendered views are written next to the model.
    7. Finish. Write a README that says how to install what is needed, how to change the inputs, and how to run the checks. Run the one command from a clean folder. Check: every item under Definition of done in spec.md is true.
    # Tasks
    
    Work in order. Finish a task's check before starting the next.
    
    1. **Set up.** Install the tool in the `tool` input (CadQuery or OpenSCAD)
    and a mesh library for the checks. Read `spekkr.inputs.json` into one
    place at the top of the model.
       Check: an empty or trivial model is written and read back, and the
    inputs are visible in that source.
    
    2. **Fit and features (R1).** Build what `R1. Fit and features` asks for,
    to the numbers in `design.md`. In particular: The lid sits on the base
    with a 0.2 mm peripheral clearance, and the two solids do not overlap in
    the closed pose.
       Check: the `R1. Fit and features` acceptance checks pass.
    
    3. **Files and frames (R2).** Build what `R2. Files and frames` asks for,
    to the numbers in `design.md`. In particular: Export base and lid (and
    latches if separate). Meshes watertight. Renders: closed, exploded, a
    latch close-up, and a groove section.
       Check: the `R2. Files and frames` acceptance checks pass.
    
    4. **Inputs (R3).** Build what `R3. Inputs` asks for, to the numbers in
    `design.md`. In particular: Numeric inputs are read from
    `spekkr.inputs.json` and must stay inside the ranges in the Inputs table
    in `design.md`.
       Check: the `R3. Inputs` acceptance checks pass.
    
    5. **Checks and report (R4).** Build what `R4. Checks and report` asks
    for, to the numbers in `design.md`. In particular: One command builds the
    model at the defaults and at the person's inputs, measures it against
    `design.md`, and writes a short report.
       Check: the `R4. Checks and report` acceptance checks pass.
    
    6. **Goldens and the report.** Render the documented views of the default
    model. Run the one-command report at the defaults, at the person's inputs,
    and at one more legal set.
       Check: the report says pass throughout, and the rendered views are
    written next to the model.
    
    7. **Finish.** Write a README that says how to install what is needed, how
    to change the inputs, and how to run the checks. Run the one command from
    a clean folder.
       Check: every item under Definition of done in `spec.md` is true.
    

    Open tasks.md as plain text

  • reference/model.scad A parametric OpenSCAD reference of the default model, used to make the listing pictures. A build may use CadQuery or OpenSCAD and does not have to start from this file.
  • shots/hero.png Studio hero of the default model.
  • shots/detail.png Closer studio still of a joint, pocket, or surface.

Is it for me?

Kind
CAD
Tools
CadQuery, OpenSCAD

What does it need?

Agent permissions
shell
Commands it runs
install CadQuery or OpenSCAD, whichever the tool input names install a mesh library, such as trimesh

What changed?

  • 0.2.014 Nov 2026Studio product shots from a shared Cycles rig (cyclorama, PLA materials), including a short loop when present.
  • 0.1.014 Nov 2026First version.

For agents: start.md says how to build this spec, spec.json holds everything on this page, and bundle.tar.gz holds its files.